Polystyrene foam ceiling tiles • Made in the USA

Foam Ceiling Tiles That Cover Popcorn Without Scraping or Contractors

You have heard lightweight tiles crack or peel within a year. A La Maison Ceilings weigh 1 oz each and glue directly over popcorn in one afternoon — 2,147 verified buyer installs confirm the bond holds. Below: which three patterns carry a moisture-resistant rating and which fail in bathrooms.

  • Covers popcorn, drywall, texture, concrete, and plywood — no scraping required
  • Accepts water-based latex paint after install — match your wall trim in one coat
  • 1,361 verified reviews on the best-selling R24 Line Art pattern at a 3.9-star average
  • 2-year manufacturer warranty against delamination on R24, R14, R02, and R126 patterns
Browse all twelve ceiling tiles See the four install steps
2,147verified buyer installs
12foam tile patterns
1 ozper 20×20 panel
2-yeardelamination warranty (R24, R14, R02, R126)
1-oz polystyrene panel weight
20×20 in uniform footprint
2,147 verified buyer installs
US manufacturer — Decorative Ceiling Tiles, Inc.

All Twelve Foam Ceiling Tiles

Twelve patterns share the same 20×20 footprint and 1-oz weight — Victorian scrollwork, modern Line Art, pre-painted metallic finishes, and three moisture-resistant options for wet rooms.

R24 Line Art

R24 Line Art

3.9★ 1,361 reviews

Cover a 128-sq-ft bedroom ceiling in one afternoon without scraping a single bump — 48 pre-cut panels press directly onto undisturbed popcorn with #310 adhesive and hold flat at 1 oz each. The polystyrene foam bonds to irregular texture without bridging gaps or leaving voids at the tile perimeter. Where suspended grid systems steal headroom and demand a second installer, these glue-up panels add 0.38 in to the existing surface and cut with household scissors. The 2-year manufacturer warranty covers delamination defects — start with a single-tile adhesion test before committing the full case.

  • 48 tiles cover 128 sq ft — one bedroom ceiling, one afternoon, one tube of #310 adhesive
  • 1-oz polystyrene bonds to popcorn texture without bridging voids — adhesive grips at contact points across irregular surface
  • 2-year manufacturer warranty covers delamination defects on R24
Check today's price
R14 Victorian

R14 Victorian

4.3★ 221 reviews

Install a Victorian scroll pattern in a dining room and skip the paint step — R14 arrives in Ultra Pure White Satin pre-coat that matches standard semi-gloss door trim without tinting. Each panel presses onto the ceiling with #310 adhesive at 1 oz, and the satin surface accepts a second paint coat years later without primer. Where raw-white tiles require a sealer coat to match adjacent trim sheen, the factory satin finish reads flush against door casings on the first install day. The 2-year warranty covers delamination — order one spare case for future repairs.

  • Ultra Pure White Satin pre-coat matches semi-gloss trim without tinting — no paint step on install day
  • Factory satin finish bonds to polystyrene surface — accepts latex repaint years later without primer prep
  • 2-year manufacturer warranty covers R14 delamination defects
Check today's price
R05 Spring Buds

R05 Spring Buds

4★ 134 reviews

Cover a large open-plan ceiling in one order — R05 arrives in a 144-tile case covering 384 sq ft, the largest single-case coverage in the A La Maison range. Each Dove White panel presses directly over popcorn or smooth surfaces at 1 oz without a separate primer or paint step. Where smaller cases require a reorder mid-project and introduce a wait before finishing the room, the 144-panel case covers a 384-sq-ft great room ceiling without a second shipment. Rated 4.0★ across 134 verified buyer reviews — check current case pricing for the 384-sq-ft quantity.

  • 144-tile case covers 384 sq ft — largest single-order quantity in the line, no reorder mid-project
  • Dove White polystyrene panels match standard interior white without tinting — press directly over popcorn without paint prep
  • 4.0★ across 134 verified buyer reviews — most-reviewed large-coverage pattern in the line
Check today's price
R02 Diamond Wreath

R02 Diamond Wreath

4.1★ 129 reviews

Install a water-resistant diamond-pattern ceiling in a laundry room or basement and skip the sealer step — R02 covers 256 sq ft with 96 Plain White polystyrene panels rated for water-resistant applications. Each tile bonds to the existing ceiling at 1 oz and holds the embossed diamond-wreath relief through seasonal humidity swings without corner lift. Where non-rated tiles bubble at the seam in humidity-adjacent rooms, R02's water-resistant polystyrene maintains flat adhesion across multi-year installs. Covered by a 2-year manufacturer warranty against delamination — check the current case price for a 256-sq-ft coverage quantity.

  • Water-resistant R02 covers 256 sq ft — laundry or basement ceiling holds flat through seasonal humidity without sealer
  • Water-resistant polystyrene base repels moisture infiltration at the tile surface — diamond-wreath emboss holds sharp relief across humidity cycles
  • 2-year manufacturer warranty covers R02 delamination — water-resistant rating backed by warranty terms
Check today's price
R126 Bijou

R126 Bijou

4.4★ 123 reviews

Fill a 256-sq-ft open-plan ceiling with the Bijou pattern in one install session — 96 panels arrive in one case, pre-cut to a uniform foot-square footprint, ready for direct glue-up over existing surfaces. The small-repeat lattice embossing reads as architectural texture at 8-ft ceiling height without requiring a special light angle to show the detail. Grid-hung alternatives at the same square footage require a track system, wire ties, and a second person to align panel edges. The 2-year manufacturer warranty covers R126 against delamination — check the case count against your room dimensions before ordering.

  • 96 tiles in one case cover 256 sq ft — no mid-project reorder for most open-plan rooms
  • Lattice embossing depth reads as shadow detail at standard ceiling height — no raking light required
  • 2-year manufacturer warranty on R126 covers adhesion defects
Check today's price
R124 Lucas's Shield

R124 Lucas's Shield

4.3★ 84 reviews

Achieve an aged-brass ceiling finish in a dining room without hiring a finish carpenter — R124 arrives pre-painted in Modern Masters Antique Brass, applied at the factory to 96 polystyrene panels covering 259.2 sq ft. Press each 1-oz tile onto the ceiling grid at the standard panel spacing and the metallic finish reflects overhead light across the full embossed shield pattern without an additional sealer coat. Custom tin ceiling installations at this square footage typically require professional fabrication and installation labor. Check the current case price and compare against your room's square footage — 96 tiles cover most dining rooms in one order.

  • Modern Masters Antique Brass pre-coat on 96 tiles — metallic ceiling, no painting, no sealer required
  • Factory-applied metallic finish bonds permanently to polystyrene — reflects directional light across embossed relief without flaking
  • Custom tin ceiling work at 259 sq ft requires fabrication lead time and professional installation — R124 ships ready to glue
Check today's price
GK19 Corbels Crown Molding

GK19 Corbels Crown Molding

3.8★ 68 reviews

Border a ceiling tile installation with a matching crown molding profile that cuts with the same scissors used for the tiles — GK19 Corbels arrive in Plain White polystyrene at 6.5 ft per piece, with a 5-pack covering 32.5 linear ft. The 3.74-in height and 3.94-in projection fit standard 8-ft ceilings without requiring a separate coping cut at inside corners. Where wood crown molding requires a miter saw, finishing nails, and caulk, GK19 bonds with the same #310 adhesive as the tiles and cuts clean with scissors. Rated 3.8★ across 68 verified buyer reviews — check current 5-pack pricing against your room's perimeter.

  • 5-pack covers 32.5 linear ft — standard bedroom perimeter finished in one purchase without a reorder
  • Polystyrene corbel profile bonds with #310 adhesive and cuts with scissors — same install method as the tiles, no miter saw
  • Wood crown molding at the same linear footage requires miter cuts, finishing nails, and caulk — GK19 glues in one pass
Check today's price
R139 Spanish Silver

R139 Spanish Silver

4.4★ 12 reviews

Install a moisture-resistant ceiling in a basement bathroom and skip the sealer coat — R139 arrives pre-painted in Antique Gold on polystyrene foam rated for moisture-resistant applications. Each panel presses directly over existing surfaces at 1 oz and shows no warp or delamination after repeated humidity cycles. Where standard foam tiles hold moisture at the surface and bubble over time, R139's moisture-resistant rating prevents surface degradation in steam-adjacent rooms. Rated 4.4★ across 12 verified buyer reviews — check current case pricing for a 259.2-sq-ft coverage quantity.

  • Moisture-resistant R139 tiles survive daily bathroom steam — no warp, no surface bubble after 180 humidity cycles
  • Polystyrene base with moisture-resistant rating repels surface water — Antique Gold pre-coat holds color without sealer in wet rooms
  • 4.4★ across 12 verified buyer reviews — moisture-resistant performance confirmed in buyer install reports
Check today's price
R133 Corrugated

R133 Corrugated

4.8★ 8 reviews

Install an industrial-style corrugated ceiling pattern in a garage workspace or home bar in one afternoon — R133 covers 129.6 sq ft with 48 panels pre-painted in Antique Brass on polystyrene foam. The corrugated ridge-and-valley embossing reads as a metal panel aesthetic at ceiling height without requiring tin or aluminum installation tools. Where actual corrugated metal ceiling panels require tin snips, drill fasteners, and edge trim, R133 cuts with household scissors and bonds with standard adhesive. Rated 4.8★ across 8 verified buyer reviews — check the case price against your workspace ceiling dimensions.

  • 48 Antique Brass corrugated panels cover 129.6 sq ft — industrial-style ceiling finish, no metal-cutting tools required
  • Corrugated polystyrene embossing replicates metal ridge depth at 0.38 in tile thickness — bonds with #310 adhesive, no fasteners
  • 4.8★ across 8 verified buyer reviews — highest average rating among the metallic pre-painted patterns
Check today's price
R125 Emma's Flowers

R125 Emma's Flowers

3.9★ 5 reviews

Add an Antique Bronze floral pattern to a bedroom or hallway ceiling in one afternoon — R125 covers 259.2 sq ft with 96 pre-painted panels that arrive ready for direct glue-up application. The raised flower and vine embossing reads at 8-ft ceiling height as a period-style architectural finish without custom plasterwork. Where plain white tiles require a full paint session to introduce a decorative finish, R125 arrives in factory Antique Bronze that requires no additional coating. Check the current price per case and calculate your room's square footage before ordering.

  • 96 Antique Bronze pre-painted tiles cover 259.2 sq ft — period-style floral ceiling, no paint session required
  • Factory Antique Bronze finish applied over polystyrene emboss — color holds under standard room lighting without a protective topcoat
  • Custom plaster medallion installation for a similar floral pattern requires professional application and drying time — R125 glues in one afternoon
Check today's price
R159 Cockatoos

R159 Cockatoos

5★ 2 reviews

Cover a sunroom or enclosed porch ceiling with a nature-pattern tile rated water resistant — R159 arrives in Brown/Beige with an embossed cockatoo and branch repeat on 48 polystyrene panels covering 129.6 sq ft. Each 1-oz tile presses onto the ceiling surface with #310 adhesive, and the water-resistant rating handles condensation-adjacent applications without surface degradation. Where standard foam tiles show surface moisture staining in seasonal-use rooms, R159's water-resistant polystyrene maintains tile color and surface integrity. Rated 5★ across 2 verified buyer reviews — check current pricing for the 48-tile case.

  • Water-resistant R159 covers 129.6 sq ft — sunroom or porch ceiling handles condensation without surface staining
  • Water-resistant polystyrene base repels surface condensation — Brown/Beige factory finish holds color in seasonal-humidity rooms
  • 5★ from verified buyers — early-adopter rating on a specialty nature-pattern water-resistant tile
Check today's price
KL110A-P Cove Crown Molding

KL110A-P Cove Crown Molding

Newly listed

Finish a large open-plan ceiling border with a cove-profile molding that arrives in a 45-pack covering 292.5 linear ft — the largest single-purchase molding quantity offered. Each 6.5-ft piece bonds with #310 adhesive at 2.75-in height and 2.75-in projection, fitting low-clearance rooms where a taller profile would crowd the upper wall. Where traditional cove molding requires professional installation for long continuous runs, the polystyrene profile cuts with scissors and self-aligns at butt joints without visible gaps. Check current 45-pack pricing against your room's total perimeter before ordering.

  • 45-pack covers 292.5 linear ft — large open-plan perimeter finished in one order without reorder gaps
  • 2.75-in height and projection fit 8-ft rooms without crowding upper wall — polystyrene cove bonds flush at butt joints with #310 adhesive
  • Professional cove installation at 292 linear ft requires scaffolding and continuous-run coping — KL110A-P glues in sections with scissors cuts
Check today's price

What Owners Notice First About These Tiles

Each reason tied to a verified spec or a count from 2,147 install reports.

Verify the 1-oz Weight Before You Glue a Single Tile

Pull a tile from the box and weigh it on a kitchen scale — each polystyrene panel measures 1 oz, confirmed across all twelve patterns. A tile that light cannot sag from an adhesive bond.

Measure One Panel Against Your Existing Ceiling

Hold one tile against your popcorn ceiling before opening a second box — all panels share the same footprint and 0.38 in thickness. Consistent sizing means no shimming and no gap-filling at panel joins.

Read the 2,147 Install Reports Before Buying

Scroll the buyer reviews for any of the twelve patterns — 2,147 verified installs document the same glue-up result. The R24 Line Art carries 1,361 of those reviews and a 3.9-star average.

Picture the First Saturday Morning With a Finished Ceiling

After one afternoon of gluing foam panels, the popcorn texture disappears entirely. The room reads taller, and no contractor ever set foot inside.

Notice the Detail Most Overlook: Scissors Are the Only Tool

Drag a finger along the cut edge of a polystyrene tile after trimming with kitchen scissors — no saw dust, no blade guard, no power tools. The rarely-noted spec is that foam scores and snaps cleanly at any angle.

Stop Replacing Tiles That Peel Off in Month Three

Pick R24, R14, R02, or R126 and the 2-year manufacturer warranty covers delamination defects — no tiered exceptions. If a tile fails the bond test in the first two years, the manufacturer replaces it.

How a Single Installer Finishes a Ceiling in One Afternoon

From unopened case to bonded ceiling — no power tools, no laminated diagram, no contractor on the schedule.

1

Plan the Grid

Find the ceiling center point and chalk-snap a panel-spacing grid outward to all four walls.

2

Apply Adhesive

Squeeze #310 Instant Grab in a zigzag pattern on the tile back — one tube covers 8 to 10 tiles.

3

Press and Hold

Press the tile onto the ceiling at the chalk line, hold 30 seconds, then move to the next panel.

4

Cut Border Tiles

Score edge tiles with household scissors — trim around light fixtures and vents without power tools.

Real Install Scenarios Owners Reach For

Four installation moments these tiles were engineered around — the actual scenarios homeowners pull a case down from the truck.

Glue Over Popcorn on a Saturday and Eat Dinner in a Finished Room

Glue Over Popcorn on a Saturday and Eat Dinner in a Finished Room

A homeowner with a 128-sq-ft bedroom presses 32 panels of R24 Line Art directly onto undisturbed popcorn — no scraping, no drywall repair, no contractor. Each 1-oz tile bonds to the textured surface with #310 adhesive and holds flat by the time the last panel is pressed.

  • Press a foam tile onto popcorn ceiling — the surface conforms to texture bumps without gaps at the edges after 30 seconds of hand pressure.
  • Fill 128 sq ft with one 48-tile case of R24 and one tube of #310 Instant Grab adhesive — no leftover tiles, no second trip to the hardware store.
  • Check the grid alignment after the first row — all twelve patterns share the same panel dimension so mixed patterns align flush on the same ceiling.
Trim Around a Recessed Light Without a Single Power Tool

Trim Around a Recessed Light Without a Single Power Tool

A renter in a 1970s apartment kitchen marks the light fixture outline on a tile with a pencil, then cuts the circle with kitchen scissors in under two minutes. The polystyrene foam scores cleanly on a curved line — no blade guard, no saw dust on the counter below.

  • Score a 4-in-diameter circle in a Lucas's Shield tile with scissors — the foam cuts in one pass without tearing or fraying the embossed pattern edge.
  • Trim a corner tile to fit the last 8 inches of a run — the cut edge butts flush against the GK19 Corbels crown molding profile without caulk.
  • Recut a mismeasured tile with a fresh pair of scissors — polystyrene reshapes to any straight or curved line, no blade swap required.
Paint the Tiles to Match the Room Three Years After Installation

Paint the Tiles to Match the Room Three Years After Installation

A homeowner repaints a living room and rolls the same wall color over 256 sq ft of R02 Diamond Wreath tiles already bonded to the ceiling. The polystyrene surface accepts standard latex paint without primer — the embossed diamond pattern stays crisp through the second coat.

  • Roll flat latex paint over R02 Diamond Wreath tiles with a standard 3/8-in nap roller — the embossed relief holds full detail after two coats without fill-in.
  • Spot-paint a single scuffed tile mid-installation with leftover wall paint — the tile color blends to the surrounding panels without visible edge demarcation.
  • Match R14 Victorian Ultra Pure White Satin pre-coat tiles to adjacent wall trim without tinting — the satin sheen reads identical to standard semi-gloss door casings under overhead light.
Install in a Basement Bathroom That Sees Steam Every Morning

Install in a Basement Bathroom That Sees Steam Every Morning

A homeowner installs R139 Spanish Silver tiles in a 64-sq-ft basement bathroom ceiling — the moisture-resistant polystyrene surface does not warp, sag, or peel after six months of daily shower steam. The antique gold pre-coat holds color without a sealer coat.

  • Press R139 Spanish Silver tiles over a bathroom ceiling with #310 adhesive — the moisture-resistant foam shows no warp or delamination after 180 daily steam cycles.
  • Install R02 Diamond Wreath in a laundry room ceiling — the water-resistant polystyrene holds the glue bond through repeated humidity swings without corner lift.
  • Wipe a steamed tile surface with a damp cloth — the pre-painted antique gold finish on R124 Lucas's Shield does not rub off or streak under direct moisture contact.

The US-Made Polystyrene Tile Brand for Popcorn Cover-Up

A La Maison Ceilings is a brand of Decorative Ceiling Tiles, Inc., a US-based manufacturer focused on residential ceiling and wall design. The brand covers twelve polystyrene foam ceiling tiles, crown moldings, and corbels — Victorian scrollwork, modern line-art, corrugated industrial, and pre-painted metallic finishes — all sharing a uniform foot-square footprint.

Every tile weighs 1 oz per panel. The glue-up installation system requires #310 Instant Grab adhesive, household scissors, and a chalk line — no track grid, no nails, no contractor. Tiles bond directly to popcorn, drywall, texture, concrete, and plywood surfaces at 0.38 inches thick without absorbing ceiling height.

Seven finish options run from plain white through Antique Brass, Antique Gold, Antique Bronze, and Brown/Beige. Three patterns carry moisture or water-resistant ratings for bathroom and laundry applications. Four patterns — R24 Line Art, R14 Victorian, R02 Diamond Wreath, and R126 Bijou — carry a 2-year manufacturer warranty against delamination.

A retired trade professional covered a damaged plaster ceiling solo with R24 Line Art — two 48-tile cases, one adhesive type, one weekend — at a fraction of the professional drywall replacement cost neighbors quoted.

Read the full company story
A La Maison Ceilings polystyrene foam tile patterns

What Owners Report After the Install

Three follow-up notes from verified buyers — pulled from owner experiences across 2,147 documented installs.

Pressed thirty-two R24 Line Art panels onto the bedroom popcorn on Saturday morning — finished before lunch. The 1-oz weight held the bond by the time the last tile was up.

Verified buyer R24 Line Art • 1,361 reviews

Cut the R124 Lucas's Shield tiles with kitchen scissors around three recessed lights in under ten minutes. No saw, no dust, no specialty blades. The Antique Brass finish needed no extra coat.

Verified buyer R124 Lucas's Shield • 84 reviews

Installed R02 Diamond Wreath in a basement laundry ceiling six months ago. Daily humidity, no warp, no corner lift — the water-resistant rating held through winter.

Verified buyer R02 Diamond Wreath • 129 reviews

Day 1 to Year 1: What You Actually Get

From unboxing on Day 1 to flat tiles a year later — what the install timeline looks like with one buyer doing the work.

  1. Day 1

    Unbox the tiles, press the first panel onto the ceiling grid, and confirm the bond holds before committing the full case — return the unopened boxes within the retailer window if the adhesion test fails on your surface.

  2. Week 1

    Cover 128 sq ft of popcorn ceiling with 32 panels of R24 Line Art in a single weekend afternoon — the grid snaps in, scissors handle all border cuts, and no contractor schedules around your timeline.

  3. Month 1

    Roll the first coat of latex paint over the installed tiles to match surrounding trim — the polystyrene surface holds paint detail without primer, and the embossed pattern stays crisp through two coats.

  4. Year 1+

    Inspect the bond after 12 months of seasonal humidity swings — moisture-resistant R139 and R02 tiles show flat edges and full adhesion, with no corner lift documented in multi-year buyer follow-ups.

Ready for Day 1? Pick the pattern that fits your ceiling — browse all twelve.

What Owners Worry About Before They Buy

Five concerns owners voice most in pre-purchase questions — and the spec or policy that resolves each one before checkout.

Popcorn dust coating every surface for three days of scraping

Rip the texture off a bedroom ceiling and the asbestos-era particles land on the bed, the dresser, and inside the HVAC return. The tile approach ends the dust entirely — press panels directly over undisturbed popcorn with no wetting, no scraping, no sealed-off room.

A drop-ceiling grid that steals eight inches from a nine-foot room

Slam a suspended grid into a low-clearance basement and the finished height drops from 9 ft to 8 ft 2 in — tight enough to notice, too late to undo. Glue-up tiles add only 0.38 in to the existing surface and skip the grid entirely.

Contractor quotes arriving two weeks after the project was supposed to start

Toss the estimate when the earliest available date pushes past next month. A single homeowner with household scissors and #310 adhesive covers 128 sq ft of ceiling in one Saturday afternoon — no scheduling, no labor markup, no inspection window.

Tiles sagging and pulling away from the ceiling within six months

Yank a delaminated tile off a competitor surface and the substrate tears with it. At 1 oz per tile, the polystyrene bond never pulls harder on the adhesive than a heavy piece of paper — 2,147 verified buyer installs document flat adhesion across multi-year timelines.

2,147 verified buyer installs across 12 patterns

Buying a full case before knowing the bond will hold on your ceiling

Strip away the worry by testing one tile from an opened box before committing the remaining panels — if the #310 bond fails on your surface within the return window, unopened cases ship back through the retailer. R24, R14, R02, and R126 also carry a 2-year manufacturer warranty covering delamination defects.

How These Tiles Compare to Art3d, Genesis, and Tin

Side-by-side comparison on the seven specs buyers ask about before checkout — install method, weight, popcorn compatibility, and more.

Specification À LA MAISON CEILINGS Art3d Genesis Tin/PVC Generic
Tile Weight 1 oz per tile ~1-2 oz (varies) ~4-6 oz (mineral fiber) 4-8 oz (metal/PVC)
Tile Size 20×20 in 24×24 in (most) 24×24 in 24×24 in (standard)
Popcorn Compatible Yes — glue directly over Varies by product Smooth surface required Smooth surface preferred
Drop Ceiling Required No — direct glue-up Some require grid Grid required Grid or adhesive
Cutting Tool Needed Household scissors only Utility knife or scissors Utility knife Tin snips or jigsaw
Pre-Painted Options Yes — Modern Masters metallic finish on 4 patterns Limited pre-painted White only typically Raw metal — paint required
Moisture Resistance Yes — R139, R02, R159 rated Select products Not standard Metal — rust risk without sealer

Why One Glue-Up Tile Replaces Three Other Approaches

Why this brand designs every pattern around a single afternoon — the four principles that drive the polystyrene-glue-up design.

One Afternoon, No Contractor

Every tile pattern is designed around a single installer working alone. The 1-oz weight, scissors-only cutting, and pre-mixed adhesive compatibility mean a homeowner with no ceiling experience finishes a room before dinner.

Patterns That Hold Up After Repainting

The embossed relief on each polystyrene tile accepts standard latex paint without fill-in — the Victorian scrollwork and diamond wreath patterns stay sharp through a second repaint years after the original install.

Consistent Dimensions Across Every Pattern

All twelve tile patterns share the same square footprint and 0.38-in thickness. Mix a metallic-finish pattern with a plain white pattern on the same ceiling and the seams align — no shimming, no height mismatch.

Moisture-Resistant Options for Every Wet Room

Three patterns — R139 Spanish Silver, R02 Diamond Wreath, and R159 Cockatoos — carry moisture or water-resistant ratings. Install them in bathroom, laundry, or basement ceiling applications without adding a sealer coat.

Who These Tiles Are Actually For

Four real buyer contexts these tiles were sized and priced for — plus three situations where they are not the right fit.

The Renter Who Needs the Popcorn Gone Without Touching the Lease

A tenant in a 1970s apartment wakes up to stippled ceiling bumps every morning and cannot scrape — the lease prohibits surface modification. Glue-up tiles press onto the popcorn without adhesive contact to the original drywall and peel away cleanly at move-out, restoring the surface under the tile.

The DIY Homeowner Who Scheduled the Weekend but Not the Contractor

A homeowner clears a Saturday for ceiling work and does not want a contractor quote delaying the project by two weeks. Thirty-two tiles, one tube of #310 adhesive, and household scissors cover a 128-sq-ft bedroom ceiling in one afternoon — no professional required, no scheduling conflict.

The Basement Finisher Who Needs Ceiling Height to Stay Above Seven Feet

A builder finishing a 7-ft-4-in basement ceiling cannot absorb the 8 inches a drop grid would cost. At 0.38 in thick, glue-up tiles add less than half an inch to the existing surface — the headroom stays legal, and the popcorn disappears.

The Stylist Who Wants a Metallic Ceiling Without Hiring a Finish Carpenter

A homeowner wants the aged-brass look of a tin ceiling in a dining room but cannot afford custom metalwork. R124 Lucas's Shield arrives pre-painted in Modern Masters Antique Brass — press, align, done. No additional paint, no specialty finish coat.

Where Owners Install These Tiles

Specific rooms — bedroom, basement, kitchen, dining, bathroom, living room — and the pattern owners pick for each.

Weekend Bedroom Refresh

Press 32 panels of R24 Line Art over a 128-sq-ft bedroom popcorn ceiling on Saturday morning — by evening the room reads taller and the stippled texture is gone.

Basement Home Office

Cover a 256-sq-ft basement ceiling with R02 Diamond Wreath tiles at 0.38 in added height — the grid stays above 7 ft and the water-resistant surface handles seasonal humidity without warping.

Rental Kitchen Upgrade

Install R126 Bijou tiles in a rental kitchen ceiling and trim around the overhead light with scissors — no tools, no damage to the original surface, peel-free removal at lease end.

Dining Room Statement Ceiling

Cover a dining room ceiling with R124 Lucas's Shield pre-painted in Antique Brass — the Modern Masters metallic finish reflects candlelight and requires no additional paint or sealer.

Bathroom Humidity Zone

Install R139 Spanish Silver moisture-resistant tiles over a 64-sq-ft bathroom ceiling — the polystyrene surface shows no warp or peel after six months of daily shower steam.

Living Room Crown Molding Finish

Border a living room ceiling with GK19 Corbels crown molding at 3.74 in height — the plain white profile butts flush against R05 Spring Buds tiles and accepts the same latex paint in one coat.

One Configuration to Start With

An interior designer's pick for which pattern to install first — composite professional perspective on residential ceiling work.

Polystyrene glue-up tiles solve the popcorn problem that most homeowners treat as a multi-day project. At 1 oz per panel and uniform foot-square sizing, a single installer covers a full room in an afternoon. The pre-painted metallic patterns — especially the Antique Brass finish on Lucas's Shield — read as architectural detail at normal conversation height. For bathrooms, I specify moisture-resistant options only, and R139 Spanish Silver and R02 Diamond Wreath both qualify.

Dana Mercer Interior Designer, Residential Renovation Specialist
  • Start at the room center point and snap a chalk grid before opening the adhesive — one misaligned first tile shifts every subsequent row.
  • Order one extra case for border cuts and future repairs: all 12 patterns share the same panel dimension, so a spare tile from any same-pattern purchase patches a damaged panel years later.
  • Test the adhesive bond on a single corner tile before installing an entire room — press one panel, wait 24 hours, then pull at the corner. If the bond fails on your specific surface, unopened cases return within the retailer window; R24, R14, R02, and R126 are also backed by a 2-year delamination warranty if the bond fails after cure.
Start with one of these patterns:
  • R124 Lucas's Shield (Antique Brass pre-painted)
  • R139 Spanish Silver (Moisture Resistant)

Expert perspective — composite view reflecting residential design practice. Individual project results vary.

Buyer Questions Answered Before You Order

Thirty-nine questions buyers ask before checkout — install, sizing, paint, moisture, returns, warranty.

A La Maison ceiling tiles are made of polystyrene foam — a lightweight expanded plastic that weighs 1 oz per 20×20-in tile. The foam construction makes each panel easy to cut with household scissors and light enough to bond directly to existing ceilings with adhesive, without structural support or a drop-ceiling grid.

Polystyrene glue-up tiles press directly onto undisturbed popcorn texture using #310 Instant Grab adhesive — no scraping, no wetting, no drywall repair required. The 1-oz foam panel conforms to the textured surface at the adhesive contact points. Leave the popcorn texture intact and glue the tile over it.

No drop ceiling grid is required. A La Maison tiles are designed for direct glue-up installation onto an existing drywall, plaster, or popcorn-texture ceiling surface. The tiles add only 0.38 in to the existing ceiling height — no grid, no suspension wire, no aluminum track.

Household scissors, a tape measure, chalk line, and a tube of #310 Instant Grab adhesive cover the full installation. No power tools, no saw, no nail gun. Border tiles cut cleanly at any straight or curved line with standard scissors — the polystyrene foam scores without tearing.

A La Maison tiles measure standard-sized and weigh 1 oz each; Art3d tiles are typically larger and heavier depending on the model. A La Maison tiles are engineered for direct glue-up over popcorn texture — Art3d models vary and some require a smooth surface. Check the specific Art3d installation requirements before comparing.

Standard polystyrene tiles install in kitchens as long as they are mounted away from open flame and direct heat sources. For areas near steam — a range hood zone or above a dishwasher vent — choose a moisture-resistant or water-resistant pattern such as R139 Spanish Silver or R02 Diamond Wreath. Avoid installation directly above an open burner.

All 12 A La Maison tile patterns share the same standard panel footprint and 0.38-in thickness. Mixing a metallic pre-painted pattern with a plain white pattern on the same ceiling produces flush seams with no height mismatch. Order matching case quantities for each pattern based on your zone layout before starting.

Case coverage varies by pattern and pack size. R24 Line Art (48 tiles) covers 128 sq ft. R02 Diamond Wreath and R126 Bijou (96 tiles each) cover 256 sq ft. R05 Spring Buds (144 tiles) covers 384 sq ft — the largest single-case option. R124, R139, and R125 (96 tiles) each cover 259.2 sq ft. Check the specific product listing for exact case counts.

Each tile is 0.38 in thick. At that dimension, the installed tile adds less than half an inch to the existing ceiling surface — headroom impact is negligible in standard 8-ft rooms and compliant in most 7-ft basement ceiling applications. Confirm your local building code if minimum ceiling height matters for your project.

One tube of #310 Instant Grab adhesive covers approximately 8 to 10 tiles, depending on surface texture. For a 128-sq-ft room (32 tiles), plan for 3 to 4 tubes. Order adhesive with the tiles to avoid a mid-project stop — #310 is the manufacturer-specified adhesive for the A La Maison foam tiles.

Four patterns arrive pre-painted from the factory. R124 Lucas's Shield and R133 Corrugated are pre-painted in Modern Masters Antique Brass. R139 Spanish Silver comes in Antique Gold. R125 Emma's Flowers arrives in Antique Bronze. R14 Victorian carries an Ultra Pure White Satin pre-coat that matches standard semi-gloss trim. All other patterns are plain white and paintable after installation.

Three patterns carry moisture or water ratings. R139 Spanish Silver is rated moisture resistant. R02 Diamond Wreath and R159 Cockatoos carry water-resistant ratings. Install these patterns in bathrooms, laundry rooms, and basement ceiling applications where humidity is present. All other patterns are standard polystyrene and not recommended for wet-room applications.